All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Wireless and wired connection technologies

Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Spec point 2.1.2: Wi-Fi, ZigBee, Bluetooth, cellular (GSM, 3G and 4G), infrared and Ethernet. Pearson often asks you to complete a diagram, drawing a line between devices that communicate and labelling each line with the protocol used.

Practise this in the app: instant marking and a fix for every mistake. Free, no email needed to start.

Practise this lesson

Comparing the technologies

TechnologyRangePower useData rateTypical uses
Wi-Fi (IEEE 802.11)Tens of metres from an access pointMedium to highHighLaptops, phones, smart TVs on a LAN; internet access
ZigBee (IEEE 802.15.4 based)Short; extended by a mesh in which each mains-powered device relays messagesVery low (battery devices last a long time)LowSmart home and building automation: lights, sensors, smart locks, blinds, linked to a hub
BluetoothShort (personal area network, around 10 m for many devices)LowMediumHeadphones, mice, keyboards, phones to car systems, wearables
Cellular (GSM, 3G, 4G)Kilometres, from phone masts; wide areaHighGSM low (calls, text); 3G moderate; 4G highMobile phones, tethering, mobile data in vehicles
InfraredVery short, needs line of sightVery lowLowTV remote controls, some sensors
Ethernet (wired)Up to around 100 m per copper cable run; further with fibreMains powered devicesHigh and reliableDesktop PCs, servers, printers without wireless, connecting access points to switches

Choosing

Exam technique for connectivity diagrams

From the June 2024 examiner report: a single line and a label are required between each pair of devices that communicate; some responses scored zero mainly because their lines were unlabelled. Name the protocol/technology (Wi-Fi, Bluetooth, ZigBee, Ethernet, 4G), not the medium (air, optical fibre). Pairs credited in the June 2024 mark scheme included: smart bulb and smart lock to hub (ZigBee), headphones and mouse to laptop (Bluetooth or USB), laptop to access point (Wi-Fi), server to access point and printer (Ethernet), phone to mast (cellular: GSM, 3G, 4G or 5G), remote control to projector or blinds (infrared) and laptop to projector (HDMI).

Worked example

A smart office has a smart lock, a smart bulb, a hub controller, a wireless headset, a laptop and a printer with no wireless support. Label the most suitable link for each.

  1. Smart lock to hub: ZigBee (low power, battery device).
  2. Smart bulb to hub: ZigBee.
  3. Headset to laptop: Bluetooth.
  4. Laptop to wireless access point: Wi-Fi.
  5. Printer to switch: Ethernet (no wireless support).
  6. Hub to network: Ethernet or Wi-Fi.

Answer: ZigBee for smart home devices, Bluetooth for the headset, Wi-Fi for the laptop, Ethernet for the printer.

Key idea: Wi-Fi: LAN, high rate, tens of metres. ZigBee: very low power mesh for smart devices. Bluetooth: short range peripherals. Cellular: wide area mobile data. Infrared: line of sight, very short. Ethernet: wired, fast, reliable, secure. Label every line with the protocol.

Check yourself

  1. Which technology is best for battery-powered smart light switches and sensors linked to a hub?
    • Ethernet
    • ZigBee
    • Infrared
    • GSM
    Show answer

    ZigBee. ZigBee is designed for low power, low data rate devices and forms a mesh.

  2. Which technology would normally connect wireless headphones to a laptop?
    • Ethernet
    • 4G
    • ZigBee
    • Bluetooth
    Show answer

    Bluetooth. Bluetooth is for short range personal devices.

  3. Which technology needs a clear line of sight between devices?
    • Wi-Fi
    • Infrared
    • Bluetooth
    • Cellular
    Show answer

    Infrared. Infrared light is blocked by obstacles.

  4. A printer has no wireless support. How should it join the office network?
    • By ZigBee to a smart hub
    • By infrared to a phone
    • By an Ethernet cable to a switch
    • By 4G to a mast
    Show answer

    By an Ethernet cable to a switch. Without wireless, it must be wired.

  5. In a connectivity diagram, which label correctly names the protocol between a laptop and a wireless access point?
    • Wi-Fi
    • Air
    • Copper
    • Radio waves
    Show answer

    Wi-Fi. The examiner report warned against giving media types instead of protocols.

  6. Explain one advantage of ZigBee over Wi-Fi for a smart lighting system.
    Show answer

    ZigBee devices use very little power, so battery-powered switches and sensors can run for a long time without new batteries.. Low power so batteries last; or mesh extends range.

  7. Which is the main advantage of a cellular 4G connection over Wi-Fi for a delivery van?
    • It covers a wide area from phone masts, so it works while driving
    • It is always free
    • It needs no SIM or contract
    • It has a range of a few centimetres
    Show answer

    It covers a wide area from phone masts, so it works while driving. Cellular is a wide area technology.

Practise with instant feedback

Sources

Last updated 8 November 2026. Spotted a mistake? Tell us.