All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Convergence, embedded systems and firmware
Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Spec points 1.1.3 to 1.1.5: technological convergence, embedded systems, and firmware, including where it is stored.
Technological convergence
Technological convergence is when technologies that used to need separate devices are combined into one device, or when different systems come to use the same technology. The smartphone is the classic example: phone, camera, music player, GPS navigator, games device, payment card and web browser in one. Smart TVs combine a TV with internet streaming.
Benefits: fewer devices to buy and carry, data shared between functions (a photo is geotagged and uploaded at once), lower total cost. Drawbacks: if the one device is lost or broken every function is lost; the combined functions may be lower quality than a dedicated device; heavy use drains the battery; more data in one place means a bigger security risk.
Embedded systems
An embedded system is a computer system built into a larger device to perform one dedicated function. It usually has a microcontroller (processor, memory and input/output on one chip), reads sensors and controls actuators, and runs a fixed program.
Examples: washing machine controller, car engine management and anti-lock brakes, central heating thermostat, microwave oven, traffic lights, smart meters.
Characteristics: dedicated task, small, low power, cheap to mass produce, reliable, often real time, limited or no user interface. Many are now connected to the internet (the Internet of Things), which adds remote control but also security risks.
Firmware
Firmware is software permanently held in a device that controls its hardware at a low level, for example the start-up program of a computer (BIOS/UEFI) or the control program in a router or printer.
Where it is stored: in non-volatile memory on the device, traditionally ROM, now usually flash memory (EEPROM) so that the firmware can be updated to fix bugs, patch security holes or add features. Non-volatile means it is kept when the power is off, so the device can start up.
A failed firmware update (for example power lost part way) can leave a device unusable, so updates should be done carefully.
Worked example
Explain why a router stores its firmware in flash memory rather than in RAM.
- Firmware must be available as soon as the router is switched on.
- RAM is volatile, so its contents are lost when power is removed.
- Flash memory is non-volatile, so the firmware is kept, and it can be rewritten so the manufacturer can issue updates.
Answer: Flash is non-volatile (kept without power) and rewritable (allows updates); RAM loses its contents.
Check yourself
- Which is the best example of technological convergence?
- A desktop PC with two monitors
- A printer connected by USB
- A smartphone that is also a camera, music player and satnav
- A washing machine with a timer
Show answer
A smartphone that is also a camera, music player and satnav. Several separate devices' functions combined in one.
- Which is an embedded system?
- The controller in a washing machine
- A laptop running a word processor
- A cloud storage service
- A spreadsheet
Show answer
The controller in a washing machine. It is built into a larger device for one dedicated task.
- Where is firmware normally stored?
- In RAM only
- In the cloud only
- In non-volatile memory such as ROM or flash
- On an optical disc inside the processor
Show answer
In non-volatile memory such as ROM or flash. It must survive power being turned off.
- Why do manufacturers now store firmware in flash memory instead of mask ROM?
- Because flash memory is volatile
- So the firmware can be updated after the device is sold
- So it is deleted when the device is switched off
- Because flash is slower
Show answer
So the firmware can be updated after the device is sold. Flash can be rewritten, allowing updates and security fixes.
- Explain one drawback of technological convergence for a user.
Show answer
If the single converged device is lost, stolen or broken, the user loses every function at once, such as their phone, camera and payment card.. Single point of failure, lower quality or battery drain.
- Which is a typical characteristic of an embedded system?
- It lets the user install any application
- It runs one dedicated program on a microcontroller
- It always has a large touchscreen
- It needs a supercomputer to run
Show answer
It runs one dedicated program on a microcontroller. Embedded systems are dedicated and usually have limited interfaces.
Sources
Last updated 8 November 2026. Spotted a mistake? Tell us.