All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Peripheral and storage devices

Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Spec point 1.1.1 also lists peripheral devices and storage devices, including network-attached storage (NAS) and RAID. Pearson has asked candidates to pick NAS as the storage used for shared files on a LAN.

Practise this in the app: instant marking and a fix for every mistake. Free, no email needed to start.

Practise this lesson

Peripheral devices

TypeExamplesNotes
InputKeyboard, mouse, joystick, microphone, scanner, webcam and video camera, graphics tablet, touch screen, barcode reader, biometric scanner, sensorsCapture data or commands. A touch screen is input and output
OutputMonitor, speakers, printerPresent results to the user
SpecialistChip and PIN device (reads the card chip and takes a PIN), biometric scanner (fingerprint, face, iris), sensors (temperature, light, motion)Used for payments, security and monitoring

Storage devices

StorageHow it worksStrengthsWeaknesses
Magnetic hard disk drive (HDD)Spinning platters with a moving read/write headCheap per gigabyte, high capacityMoving parts, slower, damaged by knocks
Solid state drive (SSD)Flash memory chips, no moving partsFast access, robust, low power, silentHigher cost per gigabyte
Optical disc (CD, DVD, Blu-ray)Laser reads pits and landsCheap to distribute, portableLow capacity, slow, scratches
Magnetic tape driveData written in sequence on tapeVery cheap per gigabyte, huge capacity, good for backup and archiveSerial access, so slow to find a file
Removable solid state card (for example SD, microSD)Small flash memory card. The specification calls these 'removable solid state (SSID) cards'Tiny, portable, used in cameras and phonesEasy to lose, limited write cycles
Network-attached storage (NAS)A storage device with its own network connection that shares files with users on a LANCentral shared files, easy backup, access from many devicesA single point of failure unless RAID or backups are used
RAID storageRedundant array of independent disks: several drives act as oneSpeed (striping) and/or fault tolerance (mirroring, parity)More drives needed, more cost

RAID levels you should recognise

RAID is not a backup: deleting a file or a ransomware attack affects every copy at once.

A note on 'SSID'

The specification's storage list includes 'removable solid state (SSID) cards', meaning memory cards such as SD and microSD. In networking, however, SSID means service set identifier: the name of a Wi-Fi network, not a storage device. In the June 2024 paper, SSID was one of the wrong options (with HDMI and RAID) in a question whose answer was NAS. In an answer about memory cards, write 'SD card' or 'removable solid state card' to avoid any confusion.

Worked example

A design studio of 12 staff keeps project files on individual laptops. Explain why a NAS with RAID 1 would help.

  1. A NAS gives one central place on the LAN where every member of staff can open and save shared project files.
  2. Files can be backed up from one place instead of 12 laptops.
  3. RAID 1 mirrors the data on two drives, so if one drive fails no work is lost and the NAS keeps running.

Answer: Central shared storage on the network, easier backup, and mirroring protects against a drive failure.

Key idea: Peripherals input, output or both. Storage: HDD (cheap, high capacity), SSD (fast, robust), optical, tape (cheap archive, serial), SD cards, NAS (shared storage on a LAN), RAID (several drives as one for speed or fault tolerance).

Check yourself

  1. Which storage is a device on a LAN that shares files with every user on the network?
    • HDMI
    • An SSID
    • A webcam
    • Network-attached storage (NAS)
    Show answer

    Network-attached storage (NAS). NAS has its own network connection and serves files to users. An SSID is the name of a Wi-Fi network, not storage. (Pearson's June 2024 paper offered HDMI, NAS, RAID and SSID as options; NAS was the only correct answer.)

  2. Why do organisations still use magnetic tape?
    • It gives the fastest random access
    • It is very cheap per gigabyte for large backups and archives
    • It is the most portable storage for phones
    • It cannot be damaged
    Show answer

    It is very cheap per gigabyte for large backups and archives. Tape is slow (serial access) but cheap and high capacity, ideal for archives.

  3. Which is an advantage of an SSD over an HDD in a laptop?
    • It is always cheaper per gigabyte
    • It uses a laser to read data
    • It stores data on tape
    • It has no moving parts, so it is faster and more robust if dropped
    Show answer

    It has no moving parts, so it is faster and more robust if dropped. Flash memory has no moving parts.

  4. A NAS has two 4 TiB drives configured as RAID 1 (mirroring). What is the usable storage capacity in TiB?
    Show answer

    4 TiB. Mirroring writes every file to both drives, so only one drive's worth (4 TiB) is usable.

  5. The same two 4 TiB drives are reconfigured as RAID 0 (striping). What is the usable capacity in TiB?
    Show answer

    8 TiB. Striping uses the full combined capacity: 4 + 4 = 8 TiB, with no fault tolerance.

  6. Which peripheral reads a payment card's chip and lets the customer enter a PIN?
    • A chip and PIN device
    • A graphics tablet
    • A barcode reader
    • A joystick
    Show answer

    A chip and PIN device. Used at the point of sale for card payments.

  7. Explain why RAID 1 is not a substitute for a backup.
    Show answer

    RAID 1 copies every change to both drives at once, so if a file is deleted or encrypted by ransomware, the mirror is affected too and the file cannot be recovered.. Mirroring copies mistakes and attacks instantly; a backup is a separate, older copy.

Practise with instant feedback

Sources

Last updated 8 November 2026. Spotted a mistake? Tell us.