All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data

IP addressing, DHCP and MAC addresses

Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Spec point 2.2.5: IPv4, IPv6, static and dynamic IP addresses, DHCP and MAC addressing. The June 2025 examiner report found DHCP was the row most often missed in a protocols table, often confused with DNS.

Practise this in the app: instant marking and a fix for every mistake. Free, no email needed to start.

Practise this lesson

IPv4 and IPv6

An IP address identifies a device on a network so that packets can be routed to it.

The first octet of 192.168.1.20 in binary is 192 = 11000000.

Static, dynamic and DHCP

MAC addresses

A MAC (media access control) address is a unique physical address built into a network interface card by the manufacturer. It is 48 bits, written as 12 hexadecimal digits in pairs, for example 3C:52:82:4A:1F:9B. Switches use MAC addresses to deliver frames within a local network; routers use IP addresses to send packets between networks. A MAC address normally stays the same; a device's IP address can change when it moves network.

Hexadecimal: each hex digit stands for 4 bits (a nibble). FE in hex = 15 x 16 + 14 = 254.

Worked example

A café's router gives each customer's phone an address when it connects. Explain which protocol does this and why static addresses are not used.

  1. DHCP on the router automatically leases an IP address from a pool to each phone that joins.
  2. Customers come and go, so addresses are reused when leases expire.
  3. Static addresses would need configuring by hand on every phone and could clash.

Answer: DHCP assigns dynamic addresses automatically; static addressing would be impractical and error-prone.

Key idea: IPv4: 32 bits, four denary octets. IPv6: 128 bits, eight groups of four hex digits. Static: fixed (servers, printers). Dynamic: assigned by DHCP. DNS translates names. MAC: 48-bit hardware address on the NIC, used within a LAN.

Check yourself

  1. Which protocol automatically assigns IP addresses to devices that join a network?
    • DHCP
    • DNS
    • SIP
    • HTTP
    Show answer

    DHCP. DHCP leases addresses; DNS translates names.

  2. How is an IPv6 address written?
    • Four denary numbers from 0 to 255 separated by dots
    • Twelve binary digits
    • Eight groups of four hexadecimal digits separated by colons
    • A domain name such as example.com
    Show answer

    Eight groups of four hexadecimal digits separated by colons. IPv6 is 128 bits shown in hex.

  3. Which device most needs a static IP address?
    • A network printer that every computer sends jobs to
    • A visitor's phone on guest Wi-Fi
    • A games console used occasionally
    • A smartwatch
    Show answer

    A network printer that every computer sends jobs to. Others must always find it at the same address.

  4. How many different addresses can a 32-bit IPv4 address represent? Give the exact number.
    Show answer

    4294967296. 232 = 4 294 967 296.

  5. Write the IPv4 octet 192 as an 8-bit binary number.
    Show answer

    11000000. 192 = 128 + 64.

  6. Convert the hexadecimal value FE to denary.
    Show answer

    254. F = 15, E = 14: 15 x 16 + 14 = 254.

  7. A MAC address is 48 bits. How many hexadecimal digits are needed to write it?
    Show answer

    12. Each hex digit is 4 bits: 48 / 4 = 12.

  8. Explain one difference between a MAC address and an IP address.
    Show answer

    A MAC address is a fixed physical address built into the network card, while an IP address is a logical address that can change when the device joins a different network.. Contrast the two in one linked sentence.

Practise with instant feedback

Sources

Last updated 8 November 2026. Spotted a mistake? Tell us.