All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Network components and outline network design
Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Spec points 2.2.3 and 2.2.4: switches, bridges, gateways, routers, multi-function devices, modems, repeaters, servers, network interface cards, wireless access points and hubs, and designing a network that takes account of where devices are.
Network components
| Component | What it does |
|---|---|
| Network interface card (NIC) | Hardware that connects a device to a network (wired or wireless); has a unique MAC address |
| Hub | Connects devices on a LAN and sends every incoming frame to all other ports; simple but creates unnecessary traffic and collisions |
| Switch | Connects devices on a LAN and sends each frame only to the port of the destination device, using MAC addresses; more efficient and secure than a hub |
| Wireless access point (WAP) | Lets wireless devices join a wired network by Wi-Fi |
| Router | Forwards packets between different networks (for example a LAN and the internet) using IP addresses; chooses routes |
| Modem | Modulates and demodulates: converts digital data to signals for the line (telephone, cable, fibre) and back |
| Multi-function device | A home or small office box combining router, switch, wireless access point, modem and often a firewall |
| Repeater | Receives a weakened signal and regenerates or boosts it to extend range (wired or wireless) |
| Bridge | Joins two network segments (often using the same protocol) into one network and filters traffic between them |
| Gateway | Connects networks that use different protocols, translating between them (for example a smart home hub linking ZigBee devices to an IP network) |
| Server | A computer that provides services to clients: files, print, web, email, authentication, DHCP |
Switch versus hub
The SAM asked candidates to compare these. A hub broadcasts every frame to every device, so bandwidth is shared by everyone and any device can see others' traffic. A switch learns which MAC address is on which port and sends frames only to the intended device, reducing collisions and congestion and improving security.
Outline network design
When designing a network for a building, consider where devices are:
- Put the router/modem where the internet line enters; servers in a secure, cooled room.
- Use wired Ethernet for fixed devices (desktops, printers, servers) and for links to access points.
- Place wireless access points so that their coverage overlaps across areas where people use laptops and phones; add more or use repeaters where walls block signals.
- Use switches to connect wired devices in each area; connect switches back to the router.
- Smart devices connect to a hub/gateway (for example by ZigBee).
- Think about security (physical access to equipment), scalability (spare switch ports) and cost.
On a design diagram, show each device, the links between them and label the type of connection.
Worked example
A two-floor office has desktops and a printer on the ground floor and laptops on the first floor, with the internet line arriving on the ground floor. Outline a design.
- Router/modem where the line enters on the ground floor.
- A switch connected to the router, with Ethernet cables to the desktops and the printer.
- An Ethernet cable from the switch to a wireless access point on the first floor so the laptops connect by Wi-Fi.
- Add a second access point if coverage is weak.
Answer: Router to switch; wired desktops and printer; a cabled access point upstairs for laptops.
Check yourself
- How does a switch differ from a hub?
- A switch sends data only to the destination device's port; a hub sends it to every port
- A switch connects to the internet; a hub does not use cables
- A switch boosts signals; a hub converts protocols
- A switch is wireless only
Show answer
A switch sends data only to the destination device's port; a hub sends it to every port. Switches use MAC addresses to forward frames.
- Which device forwards packets between a home LAN and the internet using IP addresses?
- Repeater
- Hub
- Router
- NIC
Show answer
Router. Routers join different networks.
- A smart home hub links ZigBee bulbs to the home's IP network. Which component role is this?
- Gateway
- Repeater
- Hub
- Modem
Show answer
Gateway. Gateways connect networks using different protocols.
- Which device regenerates a weak signal to extend the range of a network?
- Server
- Bridge
- Switch
- Repeater
Show answer
Repeater. Repeaters boost signals.
- Which component gives a computer its MAC address and connects it to a network?
- Wireless access point
- Network interface card
- Modem
- Gateway
Show answer
Network interface card. The MAC address is built into the NIC.
- Explain one reason a network manager would replace hubs with switches.
Show answer
A switch sends each frame only to the device it is meant for, so there is less unnecessary traffic and fewer collisions, making the network faster.. What a switch does plus the benefit.
Sources
- Pearson Edexcel International Advanced Level in Information Technology specification (2018), Unit 1
- Pearson Edexcel IAL Information Technology Unit 1 (WIT11/01) additional sample assessment and mark scheme
Last updated 8 November 2026. Spotted a mistake? Tell us.