All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Calculating file sizes and transmission times
Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data
Spec point 1.1.7: calculate the size of a data file and the time to transmit it. Pearson's mark schemes give marks for each correct step, and with no calculator you may leave an answer as a clear expression, so set your working out in steps.
File size formulas
- Bitmap image: width (pixels) x height (pixels) x colour depth (bits per pixel) = size in bits.
- Sound: sample rate (samples per second, Hz) x sample resolution (bits per sample) x number of channels x time (seconds) = size in bits.
- Text: number of characters x bits per character (8 for ASCII, 16 or more for some Unicode encodings).
- Video (uncompressed): size of one frame x frames per second x seconds.
Then divide by 8 for bytes, and by 1024 for each step up to KiB, MiB, GiB.
Example: a 1920 x 1080 image with 24-bit colour = 1920 x 1080 x 24 / 8 = 6 220 800 bytes = 5.93 MiB (divide by 1024 twice).
Transmission time
time (seconds) = file size / transfer rate, with both in the same units.
1. If the rate is in bytes per second (for example MiB/s), keep the file in bytes.
2. If the rate is in bits per second (for example Mbit/s), convert the file to bits (x 8).
3. Watch the prefixes. Storage uses binary prefixes (MiB = 220 bytes). Network speeds are usually advertised with denary prefixes (1 Mbit/s = 106 bits per second). Use exactly the units the question gives.
Pearson's sample question: 64 GiB read from an SD card at 80 MiB/s. Correct expression: (64 x 1024 x 1024 x 1024) / (80 x 1024 x 1024) seconds = 64 x 1024 / 80 = 819.2 s.
Exam working without a calculator
Cancel the powers of 2 before multiplying. In the SD card question the two 1024 x 1024 terms cancel, leaving 64 x 1024 / 80. Show every conversion step (for example '/ 1024 to MiB, / 1024 to GiB') because each step can earn a mark, and state the unit of your answer. Real transfers are slower than the calculation because of protocol overheads, other traffic and errors.
Worked example
A 300 MiB video is downloaded over a connection of 20 Mbit/s (1 Mbit = 106 bits). Calculate the download time.
- File in bits: 300 x 1024 x 1024 x 8 = 2 516 582 400 bits.
- Rate: 20 x 106 bits per second.
- Time = 2 516 582 400 / 20 000 000 = 125.83 s.
Answer: About 125.8 seconds (just over 2 minutes).
Check yourself
- An image is 1920 x 1080 pixels with a colour depth of 24 bits. Calculate its file size in MiB to 2 decimal places.
Show answer
5.93 MiB. 1920 x 1080 x 24 / 8 = 6220800 bytes; / 1024 / 1024 = 5.93 MiB.
- An 800 x 600 pixel image uses 8 bits per pixel. What is its size in KiB?
Show answer
468.75 KiB. 800 x 600 x 8 / 8 = 480 000 bytes; / 1024 = 468.75 KiB.
- A 60-second stereo (2 channel) recording uses a sample rate of 44 100 Hz and 16-bit samples. Calculate its size in MiB to 2 decimal places.
Show answer
10.09 MiB. 44 100 x 16 x 2 x 60 / 8 = 10584000 bytes; / 1024 / 1024 = 10.09 MiB.
- 64 GiB of data is read from a memory card at 80 MiB per second. How many seconds does it take?
Show answer
819.2 s. (64 x 1024 x 1024 x 1024) / (80 x 1024 x 1024) = 64 x 1024 / 80 = 819.2 s.
- A 2 GiB file is copied at 50 MiB/s. How many seconds does the copy take?
Show answer
40.96 s. 2 GiB = 2048 MiB; 2048 / 50 = 40.96 s.
- A document contains 5120 characters stored in 8-bit ASCII. What is its size in KiB?
Show answer
5 KiB. 5120 x 8 bits = 5120 bytes; / 1024 = 5 KiB.
- A 300 MiB file is sent over a 20 Mbit/s link, where 1 Mbit = 106 bits. How long does it take in seconds, to 2 decimal places?
Show answer
125.83 s. 300 x 220 x 8 = 2516582400 bits; / (20 x 106) = 125.83 s.
- Which expression correctly gives the time in seconds to read 64 GiB at 80 MiB/s?
- (64 x 1000 x 1000 x 1000) / (80 x 1024 x 1024)
- (64 x 1024 x 1024 x 1024) / (80 x 1024 x 1024)
- (64 x 1024 x 1024) / (80 x 1024 x 1024)
- 80 / 64
Show answer
(64 x 1024 x 1024 x 1024) / (80 x 1024 x 1024). Use 1024 at every step and the same unit (bytes) on top and bottom, as in Pearson's sample mark scheme.
Sources
- Pearson Edexcel International Advanced Level in Information Technology specification (2018), Unit 1
- Pearson Edexcel IAL Information Technology Unit 1 (WIT11/01) additional sample assessment and mark scheme
- Pearson Edexcel IAL Information Technology WIT11/01 examiner report, June 2025
Last updated 8 November 2026. Spotted a mistake? Tell us.