All subjects · Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Binary and denary units of data

Edexcel IAL Information Technology · WIT11 2 hour written exam on IT systems, networks and data

Spec point 1.1.8 asks you to know the binary units bit, nibble, byte, kibibyte (KiB), mebibyte (MiB), gibibyte (GiB) and tebibyte (TiB). This lesson comes just before file size calculations (1.1.7), which use these units. There is no calculator in the Unit 1 exam, so practise the powers of 2.

Practise this in the app: instant marking and a fix for every mistake. Free, no email needed to start.

Practise this lesson

The IEC binary units

UnitSizeAs a power of 2
bita single 0 or 1
nibble4 bits
byte8 bits
kibibyte (KiB)1024 bytes210 bytes
mebibyte (MiB)1024 KiB = 1 048 576 bytes220 bytes
gibibyte (GiB)1024 MiB230 bytes
tebibyte (TiB)1024 GiB240 bytes

IEC prefixes: each step up is x 1024

Binary (IEC) versus denary (SI) prefixes

The IEC (International Electrotechnical Commission) binary prefixes (kibi, mebi, gibi, tebi) always mean powers of 1024. The SI denary prefixes (kilo, mega, giga, tera) mean powers of 1000: 1 kB = 1000 bytes, 1 GB = 109 bytes.

This matters: drive makers sell in denary units, while many operating systems report binary units, so a '1 TB' drive (1012 bytes) shows as about 1012 / 230 = 931.32 GiB.

In Pearson's sample paper the correct option used 1024 at every step for GiB and MiB; the distractors used 1000, mixed 1000 and 1024, or had too few factors of 1024. In June 2025 the examiner report showed a response that lost marks in a GiB question because it did not show enough 1024s.

Converting: going to a smaller unit, multiply by 1024 (or 8 from bytes to bits); going to a larger unit, divide.

Binary and denary numbers

Each binary digit has a place value that is a power of 2: 128, 64, 32, 16, 8, 4, 2, 1 for one byte.

Binary to denary: add the place values where there is a 1. 10110110 = 128 + 32 + 16 + 4 + 2 = 182.

Denary to binary: take away the largest place values that fit. 200 = 128 + 64 + 8, so 200 = 11001000.

One byte holds 256 different values, 0 to 255. n bits give 2n different values.

Worked example

Convert 3 GiB to KiB, showing each step.

  1. 3 GiB x 1024 = 3072 MiB.
  2. 3072 MiB x 1024 = 3145728 KiB.

Answer: 3145728 KiB (3 x 1024 x 1024).

Key idea: bit, nibble (4 bits), byte (8 bits); KiB, MiB, GiB, TiB each x 1024 (210, 220, 230, 240 bytes). SI kB, MB, GB use 1000. Multiply to go to a smaller unit, divide to go to a larger one.

Check yourself

  1. How many MiB are there in 3 GiB?
    Show answer

    3072 MiB. 3 x 1024 = 3072 MiB.

  2. How many nibbles are there in 5 bytes?
    Show answer

    10. 5 bytes = 40 bits; 40 / 4 = 10 nibbles (2 nibbles per byte).

  3. How many bits are there in 1 KiB?
    Show answer

    8192. 1024 bytes x 8 = 8192 bits.

  4. Convert the binary number 10110110 to denary.
    Show answer

    182. 128 + 32 + 16 + 4 + 2 = 182.

  5. Convert the denary number 200 to an 8-bit binary number.
    Show answer

    11001000. 200 = 128 + 64 + 8, so the bits for 128, 64 and 8 are 1: 11001000.

  6. A drive is sold as 2 TB, where 1 TB = 1012 bytes. How many GiB is this, to 2 decimal places?
    Show answer

    1862.65 GiB. 2 x 1012 / 230 = 1862.65 GiB.

  7. How many bytes are in 1 KiB?
    • 1000
    • 1024
    • 8
    • 1 048 576
    Show answer

    1024. Kibi means 210 = 1024.

  8. What is the largest denary value that can be stored in 8 bits?
    Show answer

    255. 28 = 256 values, from 0 to 255.

Practise with instant feedback

Sources

Last updated 8 November 2026. Spotted a mistake? Tell us.